Monogram Door Knocker

Proudly display your family's initial and give your guests a warm welcome with the Monogram Door Knocker. Cast in solid brass and hand finished, this front-door accent from designer Michael Healy is unmatched in quality and craftsmanship.

• Hand made of sand-cast brass.
• Features a polished brass or brushed nickel silver finish.
• Stainless steel mounting screws included.
• Can also be used as wall decor.
• Imported.

DIMENSIONS

• Overall: 4" wide x 1.25" deep x 4" high (approximate)
• Striker Plate: 2" wide x 0.25" deep x 3" high (approximate)

CARE AND MAINTENANCE

• Your door knocker was designed for easy mounting on the surface of your door. The door knocker is attached to a black mounting bracket which is screwed directly to your door. The enclosed metal screws work well with both wood, composite and metal doors.

To mount your door knocker

• Hold your door knocker in the desired position on your door and mark the hole locations for the mounting bracket with a pencil.
• Drill guide holes ½-3/4" deep using a 1/8" drill bit. Note that on most designs, you SHOULD NOT drill holes all the way through the door. Only the Nantucket Basket, Victorian Urn and the Doctor’s door knockers require 1 or 2- 3/16" holes to be drilled through your door. In this case the long brass screw(s) provided go through the door and screw into the back of the knocker.
• Some designs require the door knocker to be removed from the mounting bracket before the bracket can be attached to your door. Remove the hinge screw and you can detach the door knocker from the mounting bracket./
• Screw the mounting bracket into the desired position on your door using the enclosed Phillip’s head screws.
• If necessary, screw the door knocker to the mounting bracket once more. Your door knocker is now ready to provide years of reliable service.